.

Cedarshield – The Best Cedar Coating

Cedarshield - cedar deck oil

CEDARSHIELD is a premium-quality Australian product specially formulated to enhance and protect timber surfaces against the harsh Australian climate. Furthermore, it will not support combustion in a Bushfire situation, where oil coatings are a fire accelerant! A transparent timber finish that looks like a fresh oil finish but actually a water-based coating that will last at least 5 times longer than oils. It is thicker than oils and will plug and seal most cracks and checks in exterior cedar cladding. It’s scientifically-proven formula utilises the most recent technology and superior-quality ingredients to achieve the maximum protection against damaging environmental elements for both dressed and rough-sawn timber. The careful formulation yields a premium product which is easy to apply and outlasts alternative products.

Guaranteed with a 5 Year Warranty not to crack, peel or blister when applied according to label directions.

Uses

CEDARSHIELD is suitable for application to Western Red cedar weatherboards, railings, verandah posts etc., and can also be used with stunning effect on most other timbers. CEDARSHIELD is not recommended for use on windows, doors, decking or outdoor furniture.[singlepic id=193 w= h= float=left]

Preparation

New timber must be sound, clean and free from dust, dirt, mould and grease, and reasonably dry. CEDARSHIELD can be used to overcoat acrylic-finishes and cover most oil finishes, provided they are well weathered. Wash down thoroughly with water and detergent using a stiff brush.

If the existing coating is not sound or acceptable, it is necessary to remove it by suitable means such as ‘Pressure cleaning’ or ‘water-blasting’ on a ‘Soft’ setting. Once you have created a clean and sound substrate on which to build the CEDARSHIELD system, apply three coats of Cedarshield to restore your Cedar to its former glory!

Application

Stir thoroughly prior to application and regularly during application. For best results, apply three coats of CEDARSHIELD to ensure sufficient film thickness to adequately protect the timber surface. Initially, CEDARSHIELD has an opaque milky appearance which quickly clears; then when dry it has the warm appearance of natural timber. If necessary the first coat can be thinned with 5% water (50cc/litre) when painting in hot, dry conditions. Avoid painting in direct hot sunlight and when the temperature is below 10°C. Ensure an even coverage on all surfaces including side and end grain. Allow 2 hours between coats, depending upon conditions and before the likelihood of rain or condensation.

Clean Up

Clean equipment with water immediately after use. Methylated spirits can be used if the CEDARSHIELD has dried and will not clean up with water. Keep the can sealed when not in use.

Coverage

One litre will cover approximately 10-14 square metres on smooth timber and approximately 6-10 square metres on rough-sawn timber, depending on the texture of the surface being treated.

Maintenance

Occasional inspection will reveal if maintenance is required. Any area which may show discolouration, fading or timber-cracking should be sanded, washed clean and the necessary coats applied to restore the original appearance.

Where to buy

We stock CEDARSHIELD in 4, 10 and 20 litre tins. You can purchase this directly from our online store here https://greenspan.store/cedarshield-select-your-size/.

Download design price guide
  • Granny Flats
  • Backyard Studios
  • Backyard Offices
  • Backyard Pods
  • Art Studios
  • Timber Barns
  • Barn Homes
  • Accommodation Sheds
  • Off Grid Cabins
  • Pool House Designs